Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Your work is awesome.
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=8764		 Page 1 of 1
Author:  nathan c [ Mon Oct 09, 2006 11:33 am ]
Post subject: 
Just had to say that. The work I've seen in the CNC forum is awesome. I worked in a machine shop for 7 years (age 17 - 24). I've ran every piece of machinery in the shop with the exception of the EDM (Electro - Dye something or other). It's amazing the accuracy you guys have (like the inlays). I've seen some 250k (USD) machines from Mori Seki that couldn't do that fine of detail. Or, maybe it's just the quality of the operators .

Good work guys. You've gotten me wanting to start using CNCs again. Not as a job. BUt maybe as a hobby.
Author:  npalen [ Tue Oct 10, 2006 5:18 am ]
Post subject: 
Nay
I understand where you're coming from. If someone
had told me back in the 60's that we would someday be able to hook a desktop computer to a machine tool in one's garage I would probably have said, "yea right".
Nelson
Author:  John How [ Tue Oct 10, 2006 6:20 am ]
Post subject: 
[QUOTE=npalen] Nay
I understand where you're coming from. If someone
had told me back in the 60's that we would someday be able to hook a desktop computer to a machine tool in one's garage I would probably have said, "yea right".
Nelson[/QUOTE]

I'd have said, "Hook up a what?"
Author:  Billy T [ Thu Oct 19, 2006 2:23 pm ]
Post subject: 
Electro Discharge Machine-
And yes..... the Mori Seki, definitely, can do it too!!!
Author:  npalen [ Mon Oct 23, 2006 3:36 am ]
Post subject: 
Modern Machine Shop
Interesting article that was posted on the MIMF.
Nelson
Author:  npalen [ Mon Oct 23, 2006 2:01 pm ]
Post subject: 
Someone may have already mentioned this but the latest Taylor Factory Friday has some neat stuff on tooling and CNC.
Nelson
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/